Medicalequipment Belt Bed Head Unit Three Cavity Structure Electrical Separation Separation of Strong Weak Electricity

1. The ward equipment belt is made of aluminum alloy material, with specifications of width ≥ 200mm, height ≥ 60mm, and wall thickness ≥ 1.3/1.5mm; 2. Referring to the HTM2022 standard, the design concept of electrical separation and separation of strong and weak electricity is adopted. The internal structure of the equipment adopts a three chamber structure, which realizes the installation of strong electricity, weak electricity, and gas pipelines in separate slots to ensure electrical safety and has electrical fire protection; 3. The equipment adopts a multifunctional design and can accommodate various electrical equipment and gas terminals, including power sockets, bedside lamps, light switches, medical gas terminals, nurse call systems, etc. It can be configured according to design requirements; 4. The equipment adopts a multifunctional design, which can integrate gas terminals, power sockets, bedside lamps, light switches, etc; 5. The equipment with panel and base adopts a buckle type structure, making installation and maintenance simple and convenient; 6. Surface treatment: spraying, oxidation, wood grain, process and color patterns can be customized; 7. The equipment belt in the ward is arranged throughout the room, with the center of the equipment belt 1.4 meters above the ground; 8. Can avoid the risk of electric shock during normal use and single fault state; Can have double insulation or reinforced insulation components, or safety ultra-low voltage operating components, or accessible parts protected by protective impedance; 9. Adopting 4W LED lighting fixtures, 5-hole sockets, and large board switches, all installed on the equipment belt, with the option of not protruding from the equipment belt panel; 10. The ward equipment meets the requirements of GB 50751-2012 "Technical Specification for Medical Gas Engineering" standard; 11. The device with panel adopts a modular integrated structure, with a novel appearance; 12. The equipment is equipped with electrical separation. Provide GB9706.1-2007 "Medical Electrical Equipment Part 1: General Requirements for Safety" and salt spray testing report.